Supported releases:

• Debian

  • 8.0 (Jessie)
  • 9.0 (Stretch)
  • 10.0 (Buster)

• Ubuntu

  • 14.04 LTS (Trusty)
  • 16.04 LTS (Xenial)
  • 18.04 LTS (Bionic)
  • 20.04 LTS (Focal)

Supported platforms:

• x86
• x86_64

You can install Manticore by adding Manticore's APT repository to your repositories:

apt-key adv --fetch-keys 'https://repo.manticoresearch.com/GPG-KEY-manticore'
wget https://repo.manticoresearch.com/manticore-repo.noarch.deb
dpkg -i manticore-repo.noarch.deb
apt update

and then install Manticore Search with just apt install:

apt install manticore

In case you want to install "Nightly" (development) version:

apt-key adv --fetch-keys 'https://repo.manticoresearch.com/GPG-KEY-manticore'
wget https://repo.manticoresearch.com/manticore-dev-repo.noarch.deb
dpkg -i manticore-dev-repo.noarch.deb
apt update
apt install manticore

You can also download individual .deb files from our site.

Manticore package depends on zlib and ssl libraries, nothing else is strictly required. However if you plan to use indexer to create indexes from external storages you'll need to install appropriate client libraries. To know what exactly libraries indexer requires run it and look at the top of it's output:

$ sudo -u manticore indexer
Manticore 3.5.2 8b2c175@201002 release
Copyright (c) 2001-2016, Andrew Aksyonoff
Copyright (c) 2008-2016, Sphinx Technologies Inc (http://sphinxsearch.com)
Copyright (c) 2017-2020, Manticore Software LTD (http://manticoresearch.com)

Built by gcc/clang v 5.4.0,

Built on Linux runner-0277ea0f-project-3858465-concurrent-0 4.19.78-coreos #1 SMP Mon Oct 14 22:56:39 -00 2019 x86_64 x86_64 x86_64 GNU/Linux

Configured by CMake with these definitions: -DCMAKE_BUILD_TYPE=RelWithDebInfo -DDISTR_BUILD=xenial -DUSE_SSL=ON -DDL_UNIXODBC=1 -DUNIXODBC_LIB=libodbc.so.2 -DDL_EXPAT=1 -DEXPAT_LIB=libexpat.so.1 -DUSE_LIBICONV=1 -DDL_MYSQL=1 -DMYSQL_LIB=libmysqlclient.so.20 -DDL_PGSQL=1 -DPGSQL_LIB=libpq.so.5 -DLOCALDATADIR=/var/data -DFULL_SHARE_DIR=/usr/share/manticore -DUSE_ICU=1 -DUSE_BISON=ON -DUSE_FLEX=ON -DUSE_SYSLOG=1 -DWITH_EXPAT=1 -DWITH_ICONV=ON -DWITH_MYSQL=1 -DWITH_ODBC=ON -DWITH_PGSQL=1 -DWITH_RE2=1 -DWITH_STEMMER=1 -DWITH_ZLIB=ON -DGALERA_SOVERSION=31 -DSYSCONFDIR=/etc/manticoresearch

Here you can see mentions of libodbc.so.2, libexpat.so.1, libmysqlclient.so.20, and libpq.so.5.

Below is a reference table with list of all the client libraries for different Debian/Ubuntu versions:

Distr	MySQL	PostgreSQL	XMLpipe	UnixODBC
Ubuntu Trusy	libmysqlclient.so.18	libpq.so.5	libexpat.so.1	libodbc.so.1
Ubuntu Xenial	libmysqlclient.so.20	libpq.so.5	libexpat.so.1	libodbc.so.2
Ubuntu Bionic	libmysqlclient.so.20	libpq.so.5	libexpat.so.1	libodbc.so.2
Ubuntu Focal	libmysqlclient.so.21	libpq.so.5	libexpat.so.1	libodbc.so.2
Debian Jessie	libmysqlclient.so.18	libpq.so.5	libexpat.so.1	libodbc.so.2
Debian Stretch	libmariadbclient.so.18	libpq.so.5	libexpat.so.1	libodbc.so.2
Debian Buster	libmariadb.so.3	libpq.so.5	libexpat.so.1	libodbc.so.2

To find packages that provide the libraries you can use, for example apt-file:

apt-file find libmysqlclient.so.20
libmysqlclient20: /usr/lib/x86_64-linux-gnu/libmysqlclient.so.20
libmysqlclient20: /usr/lib/x86_64-linux-gnu/libmysqlclient.so.20.2.0
libmysqlclient20: /usr/lib/x86_64-linux-gnu/libmysqlclient.so.20.3.6

Note that you only need libraries for the types of storages you're going to use. So if you plan to index only from mysql then you might need to install only the MySQL library (in the above case libmysqlclient20).

Finally install the needed packages:

sudo apt-get install libmysqlclient20 libodbc1 libpq5 libexpat1

If you aren't going to use indexer tool at all, you don't need to find and install any libraries.

To enable CJK tokenization support the official packages contain binaries with embedded ICU library and include ICU data file. They are independent from any ICU runtime library which might be available on your system, and can't be upgraded.

After preparing a configuration file (see Quick start guide), you can start searchd server:

systemctl start manticore

To enable Manticore at boot:

systemctl enable manticore

On MacOS Manticore can be installed in two ways:

Bottles are available for:

• MacOS High Sierra
• MacOS Mojave
• MacOS Catalina

On older versions of MacOS it will attempt to compile from sources automatically.

brew install manticoresearch

For indexing the additional dependencies that can be installed using brew are mysql@5.7, libpq, unixodbc.

Afterwards you can start Manticore as a brew service:

brew services start manticoresearch

The configuration is located at /usr/local/etc/manticore/manticore.conf.

Download it from the website and unpack to a folder:

mkdir manticore
tar -zxvf manticore-3.5.2-201002-8b2c1758-release-osx10.13.6-x86_64-main.tar.gz -C manticore
cd manticore
bin/searchd  -c manticore.conf

Manticore configuration file manticore.conf is located in the directory, unpacked from the tarball.

To install Manticore in Windows you need to download the zip archive and unpack it into a folder.

In the following example we'll assume we unpack the zip contents to folder C:\Manticore.

cd C:\Manticore
unzip manticore-3.5.2-201002-8b2c1758-release-x64-main.zip

The zip comes with a sample configuration file in sphinx.conf.in. The configuration contains a @CONFDIR@ string which needs to be replaced with your data directory location. It will be the root directory of data and log folders (first is used to store indexes, second for logs). The zip package also comes with these folders, so they will be available at the location where you unzipped the package. If you want to use a different location, the two folders must be created there.

To install the searchd (Manticore search server) as a Windows service run:

C:\Manticore\bin\searchd --install --config C:\Manticore\sphinx.conf.in --servicename Manticore

Make sure to use the full path of the configuration file, otherwise searchd.exe will not be able to know its location when it's started as service.

After installation the service can be started from the Services snap-in of the Microsoft Management Console.

Once started you can access Manticore using the mysql command line interface:

mysql -P9306 -h127.0.0.1

Note that in most examples in this manual we use -h0, but in Windows you need to use localhost or 127.0.0.1 for the local host.

Compiling from sources can be used for custom build configurations, such as disabling some features, adding new or testing patches, if you want to contribute. For example, you can compile from sources disabling embedded ICU, if you want to replace it with another one installed in your system with possibility to upgrade it independently from Manticore.

• C++ compiler
  • in Linux - GNU gcc (4.7.2 and above) or clang can be used
  • in Windows - Microsoft Visual Studio 2015 and above (community edition is enough)
  • on Mac OS - XCode
• Cmake - used on all the platforms (version 3.13 or above required)

Manticore consists of different tools. The main one is Manticore search server - searchd. Features available in the server depend on different third-party libraries:

• SSL (for HTTPS implementation)
• Galera (for replication)
• Stemmer (for language stemming)
• ICU (for support of segmentation for CJK languages)
• RE2 (for regular expressions)

Some features, like support of AOT lemmatization and basic stemming are embedded and don't need any libraries.

Another big tool is indexer, which creates plain indexes from different sources. There may be different external storages. The list of libraries which indexer can use (and depend from) includes:

• mysql
• postresql
• expat
• odbc and others.

None of them are mandatory by default, but they are obviously necessary if you want to index a source, provided by a particular storage.

Internally manticore consists of big library 'libsphinx' with which different tools are linked. Because of the fact, that some dependencies are mandatory for that library, they also apply to all the tools despite the fact whether they are used or not there. The common dependencies are:

• By default, only indexing of mysql sources is expected. So, the configuration script will search for mysql dev client lib, and if nothing found, will fail. To have the possibility of indexing mysql, you need at least dev version of MySQL library. Usually it is provided in a package named libmysqlclient-dev or mysql-devel, depending on Linux flavour you use. Also, different derivatives, as dev package from mariadb (which are libmariadb-dev or mariadb-devel) might be ok. If you have mysql or derivative installed by some custom path, set env variable MYSQL_DIR to that path for configuration. Configuration will look for available program mysql_config, and use data, provided by it. OR will look for header mysql.h and library mysqlclient, if no mysql_config program found. If you're not going to use mysql sources you can explicitly set -DWITH_MYSQL=0 or -DWITH_MYSQL=NO as config parameter.
• git, flex, bison - needed if the sources are cloned from git repository. If you use official tarball with sources, they are not necessary (git is used to pick commit hash). Flex and bison are used to build parsers. In tarball sources the version is hardcoded, and parses also pre-builded into C-sources, so these tools are not necessary.
• RE2 - used for regexp_filter feature. For using the feature Manticore must be configured with -DWITH_RE2=1, otherwise it will not be available. If configured, system-wide RE2 will be searched, and if nothing found, configuration will download RE2 sources and build the feature as embedded.
• stemmer - used for additional language stemmers. Might be configured by -DWITH_STEMMER=1. If required, will be searched in the system and linked. If not found - configuration will download snowball sources and build the feature as embedded.
• ICU - for CJK languages. It replaces previous RLP platform, also used for that purpose. By default the ICU is configured as embedded, and will be built from sources. ICU, RE2 and stemmer may be either searched and used as shared libraries, provided by your system or explicitly build from sources and statically linked forever. The first option makes the binaries smaller and more flexible for upgrade (that is simple: upgrade a library in the system and take all benefits/fixes of the upgrade). By default the RE2 and stemmer libraries supposed to be used from system, and ICU configured to be built as static from sources. You can manually tune that behaviour by providing boolean options -DWITH_ICU_FORCE_STATIC=, -DWITH_RE2_FORCE_STATIC=, and -DWITH_STEMMER_FORCE_STATIC=.

• Indexing of postgresql is supported by postgresql-devel or libpq-dev packages. Absence of these packages is not fatal, your tool just will not be able to index postgresql source then. The feature can be switched on using -DWITH_PGSQL= option.
• Indexing of xmlpipe is supported by expat library, provided by expat-devel or libexpat-dev package. The feature is automatically switched on or off depending on availability of expat library. It ca also be manually tuned with help of option -DWITH_EXPAT=1.
• Indexing of generic ODBC source is supported by either iodbc or unixodbc libraries that are provided by unixODBC-devel or unixodbc-dev or iodbc alternatively. The feature is automatically switched on or off depending on availability of client library. Use -DWITH_ODBC= to tune it manually.

When used with a source indexer will try to dynamically load the necessary runtime library, and if nothing is available it will report an error. So, it is reasonable to provide all dev packages for building, and then in runtime provide only actually necessary client libraries.

For the server these dependencies may be in play:

• If you're going to work over https - you need dev version of ssl lib. Usually it comes in a package named like libssl-dev (debian-based) or openssl-devel (redhat-based). That is mandatory for support of https, but not strictly mandatory for the server (i.e. no ssl means no possibility to connect by https, but other protocols will work). SSL library versions starting from 1.0.2 to 1.1.1 may be used by Manticore, however note that for the sake of security it's highly recommended to use the freshest possible SSL library. For now only v1.1.1 is supported, the rest are outdated (see openssl release strategy for details)
• if you want replication functionality - Galera library has to be built. It will be downloaded and included into the build, however it requires by itself boost library. Having libboost-all-dev on debian-based, or boost-devel on redhat should be enough. Also, it requires ssl (despite of the requirements of the server).

Manticore sources are hosted on github. Clone the repo, then checkout desired branch or tag. Our public git workfow contains only main master branch, which represents bleeding-edge of development. On release we create a versioned tag, like 3.5.2, and start a new branch for current release, in this case manticore-3.5.2. The head of the versioned branch after all changes is used as source to build all binary releases. For example, to take sources of version 3.5.2 you can run:

git clone https://github.com/manticoresoftware/manticoresearch.git
cd manticoresearch
git checkout manticore-3.5.2

When using sources from GitHub you'll need flex and bison tools, since all internal parsers are provided as lex/yacc sources.

Tarballs are available here. Look for "Source tar.gz". Those provided by github 'Source code' archives are not what you want, so avoid using them (mainly they lack the git version which we use to make version string). The tarball sources have pre-built lexers and parsers, so flex and bison tools are not required for a build.

wget -c https://repo.manticoresearch.com/repository/manticoresearch_source/release/manticore-3.5.2-201002-8b2c175-release-source.tar.gz
tar -zxf manticore-3.5.2-*.tar.gz
cd manticore-3.5.2-*

Manticore uses cmake for pre-compiling configuration. To use it make a build directory somewhere, go to it, then invoke cmake, pointing it to the source dir. Simplest is to create the build directory inside unpacked sources.

cd manticore-3.5.2
mkdir build && cd build
cmake -DWITH_MYSQL=1 -DWITH_RE2=1 ..

The cmake script will investigate available features and configure the build according to them.

1. If you want to configure without mysql, provide explicitly -DWITH_MYSQL=0, otherwise configuring will fail if mysql is absent.
2. If you want to finally build full-featured RPM package, path to build directory must be long enough in order to correctly build debug symbols. Like /manticore012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789, for example. That is because RPM tools modify the path over compiled binaries when building debug info, and it can just write over existing room and won't allocate more. Above mentioned long path has 100 chars and that is quite enough for such case.

Options may be either provided in the form -DNAME=VALUE or via any available GUI or TUI interface interactively. On console systems usually together with cmake is also provided ccmake tool, which provides friendly access to the configuration.

• CMAKE_BUILD_TYPE (string) - can be Debug, Release, MinSizeRel and RelWithDebInfo (default). Usually we use just 'Debug' and 'RelWithDebInfo'. The first produces slower binaries, well applicable for testing and debugging features. The last is for production.
• CMAKE_INSTALL_PREFIX (path) - where to install the project. Building itself installs nothing, but prepares installation rules which are executed once you run 'make install' command, or create a package. It has a default depending on the cmake (on Linux usually /usr/local).
• DISABLE_TESTING (bool) whether to support testing. If enabled, after the build you cam run 'ctest' and test the build. Note that testing implies additional dependencies, like at least presence of PHP cli, python and available mysql server with test database. For 'just build', just disable the option, you don't need to care about it.
• USE_BISON, USE_FLEX (bool) - enabled by default, specifies whether to enable bison and flex tools. You can disable them building from tarball, as the necessary files already pre-generated and packed inside
• LIBS_BUNDLE - path to a folder with different libraries. This is mostly relevant for Windows building, but may be also helpful if you build quite often, in order to avoid downloading third-party sources each time.
• DISTR_BUILD - in case the target is packaging, it specifies the target operating system. Supported values are: bionic, buster, debian, default, jessie, macos, macosbrew, rhel6, rhel7, rhel8, stretch, trusty, wheezy, xenial. Providing DISTR_BUILD will cause to configure CMAKE_BUILD_TYPE as RelWithDebInfo, and WITH_MYSQL, WITH_EXPAT, WITH_PGSQL, WITH_RE2, WITH_STEMMER, and DISABLE_TESTING as 1. This option is intended for building packages. For example, running cmake -DDISTR_BUILD=rhel8, then make package will build RPM packaged for Red Hat Enterprise 8.

One line to get all dependencies on Debian/Ubuntu:

apt-get install build-essential cmake unixodbc-dev libpq-dev libexpat-dev libmysqlclient-dev libicu-dev libssl-dev libboost-system-dev libboost-program-options-dev git flex bison

Note: on Debian 9 (Stretch) package libmysqlclient-dev is absent. Use default-libmysqlclient-dev there instead.

One line to get all dependencies on Redhat/Centos:

yum install gcc gcc-c++ make cmake mysql-devel expat-devel postgresql-devel unixODBC-devel libicu-devel openssl-devel boost-devel rpm-build systemd-units  git flex bison

RHEL/CentOS 6 ships with an old version of the GCC compiler, which doesn't support -std=c++11 flag, for compiling use devtools repository:

wget http://people.centos.org/tru/devtools-2/devtools-2.repo -O /etc/yum.repos.d/devtools-2.repo
yum upgrade -y
yum install -y devtoolset-2-gcc devtoolset-2-binutils devtoolset-2-gcc-c++
export PATH=/opt/rh/devtoolset-2/root/usr/bin:$PATH

To compile run:

make -j4

To install run:

make -j4 install

For building package use target package. It will build package according to selection, provided by -DDISTR_BUILD option. By default it will be a simple zip archive with binaries and supplementary files.

make -j4 package

For building source tarball for future, use target tarball. All lexers and stemmers will be created running flex/bison. Then the current version will be embedded into a header file, stemmer/re2 will be embedded into sources (if configured), and the final folder will be packed into the tarball for distribution.

make tarball

For preparing official packages we use docker containers. They include all necessary environment components and are proved as working solutions by our own builds. You can recreate any of them using Dockerfiles and README.md instruction, provided in dist/build_dockers/ folder of the sources. That is easiest way to make the binaries for any supported Linux distribution, and also make packages there. Each docker provides DISTR environment variable, which can be passed directly to DISTR_BUILD config value (as -DDISTR_BUILD=$DISTR clause to cmake).

For example, to create RedHat 7 package 'as official', but without embedded ICU with it's big datafile, you may execute (implies that sources are placed in /manticore/sources folder of the host):

docker run -it --rm -v /manticore/sources:/manticore registry.gitlab.com/manticoresearch/dev/bionic_cmake314 bash
# following is inside docker shell. By default, workdir will be in the source folder, mounted as volume from the host. 
RELEASE_TAG="noicu"
mkdir build && cd build
cmake -DSPHINX_TAG=$RELEASE_TAG -DDISTR_BUILD=$DISTR -DWITH_ICU_FORCE_STATIC=0 ..
make -j4 package

For building on Windows you need:

• Visual Studio
• Cmake for Windows
• prebuilt Expat, MySQL and PostgreSQL in bundle directory.

If you build from git clone, you also need to provide git, flex and bison tools. They may be found in cygwin framework. When building from tarball these tools are not necessary. Building might be performed from cmd or from cygwin console.

For a simple building on x64:

mkdir build
cd build
cmake -G "Visual Studio 16 2019" -DLIBS_BUNDLE="C:\bundle" "C:\manticore"
cmake -DWITH_PGSQL=1 -DWITH_RE2=1 -DWITH_STEMMER=1 .
cmake --build . --target package --config RelWithDebInfo

Support for FreeBSD is limited and successful compiling is not guaranteed. We recommend checking the issue tracker for unresolved issues on this platform before trying to compile latest versions.

FreeBSD uses clang instead of gcc as system compiler and it is installed by default.

First install required packages:

pkg install cmake bison flex

To compile a version without optional dependencies:

cmake -DUSE_GALERA=0 -DWITH_MYSQL=0 -DDISABLE_TESTING=1 ../manticoresearch/
make

Except for Galera the rest of optional dependencies can be installed so:

pkg install mariadb103-client postgresql-libpqxx unixODBC icu expat

(you can replace mariadb103-client with the MySQL client package of your choice)

Building with all optional features and installation system-wide:

cmake -DUSE_GALERA=0 -DWITH_PGSQL=1 -DDISABLE_TESTING=1 -DCMAKE_INSTALL_PREFIX=/ -DCMAKE_INSTALL_LOCALSTATEDIR=/var ../manticoresearch/
make
make install

If you didn't change the path for sources and build, just move to you build folder and run:

cmake .
make clean
make

If by any reason it doesn't work, you can delete file CMakeCache.txt located in the build folder. After this step you have to run cmake again, pointing to the source folder and configuring the options.

If it also doesn't help, just wipe out your build folder and begin from scratch.