Deleting is only supported for:

• real-time indexes,
• percolate indexes
• distributed indexes that contain only RT indexes as agents

You can delete existing rows (documents) from an existing index based on ID or conditions.

DELETE FROM index WHERE where_condition

POST /delete -d '
    {
     "index": "test",
     "id": 1
    }'
POST /delete -d '
    {
        "index": "test",
        "query":
        {
            "match": { "*": "apple" }
        }
    }'

SELECT * FROM TEST;

DELETE FROM TEST WHERE MATCH ('dummy');

SELECT * FROM TEST;

POST /delete -d '
    {
        "index":"test",
        "query":
        {
            "match": { "*": "dummy" }
        }
    }'

$index->deleteDocuments(new Match('dummy','*'));

indexApi.delete({"index" : "products", "query": { "match": { "*": "dummy" }}})

res = await indexApi.delete({"index" : "products", "query": { "match": { "*": "dummy" }}});

DeleteDocumentRequest deleteRequest = new DeleteDocumentRequest();
query = new HashMap<String,Object>();
query.put("match",new HashMap<String,Object>(){{
    put("*","dummy");
}});
deleteRequest.index("products").setQuery(query); 
indexApi.delete(deleteRequest);

+------+------+-------------+------+
| id   | gid  | mva1        | mva2 |
+------+------+-------------+------+
|  100 | 1000 | 100,201     | 100  |
|  101 | 1001 | 101,202     | 101  |
|  102 | 1002 | 102,203     | 102  |
|  103 | 1003 | 103,204     | 103  |
|  104 | 1004 | 104,204,205 | 104  |
|  105 | 1005 | 105,206     | 105  |
|  106 | 1006 | 106,207     | 106  |
|  107 | 1007 | 107,208     | 107  |
+------+------+-------------+------+
8 rows in set (0.00 sec)

Query OK, 2 rows affected (0.00 sec)

+------+------+-------------+------+
| id   | gid  | mva1        | mva2 |
+------+------+-------------+------+
|  100 | 1000 | 100,201     | 100  |
|  101 | 1001 | 101,202     | 101  |
|  102 | 1002 | 102,203     | 102  |
|  103 | 1003 | 103,204     | 103  |
|  104 | 1004 | 104,204,205 | 104  |
|  105 | 1005 | 105,206     | 105  |
+------+------+-------------+------+
6 rows in set (0.00 sec)

Array(
    [_index] => test
    [deleted] => 2
)

{'deleted': 2, 'id': None, 'index': 'products', 'result': None}

{"_index":"products","deleted":2}

class DeleteResponse {
    index: products
    deleted: 2
    id: null
    result: null
}

DELETE FROM TEST WHERE id=100;

SELECT * FROM TEST;

POST /delete -d '
    {
        "index":"test",
        "id": 100
    }'

$index->deleteDocument(100);

indexApi.delete({"index" : "products", "id" : 1})

res = await indexApi.delete({"index" : "products", "id" : 1});

DeleteDocumentRequest deleteRequest = new DeleteDocumentRequest();
deleteRequest.index("products").setId(1L); 
indexApi.delete(deleteRequest);

Query OK, 1 rows affected (0.00 sec)

+------+------+-------------+------+
| id   | gid  | mva1        | mva2 |
+------+------+-------------+------+
|  101 | 1001 | 101,202     | 101  |
|  102 | 1002 | 102,203     | 102  |
|  103 | 1003 | 103,204     | 103  |
|  104 | 1004 | 104,204,205 | 104  |
|  105 | 1005 | 105,206     | 105  |
+------+------+-------------+------+
5 rows in set (0.00 sec)

Array(
    [_index] => test
    [_id] => 100
    [found] => true
    [result] => deleted
)

{'deleted': None, 'id': 1, 'index': 'products', 'result': 'deleted'}

{"_index":"products","_id":1,"result":"deleted"}

class DeleteResponse {
    index: products
    _id: 1
    result: deleted
}

DELETE FROM TEST WHERE MATCH ('dummy') AND ( mva1>206 or mva1 in (100, 103) );

SELECT * FROM TEST;

Query OK, 4 rows affected (0.00 sec)

+------+------+-------------+------+
| id   | gid  | mva1        | mva2 |
+------+------+-------------+------+
|  101 | 1001 | 101,202     | 101  |
|  102 | 1002 | 102,203     | 102  |
|  104 | 1004 | 104,204,205 | 104  |
|  105 | 1005 | 105,206     | 105  |
+------+------+-------------+------+
6 rows in set (0.00 sec)

delete from nodes4:test where id=100;

POST /delete -d '
    {
      "cluster":"nodes4",
      "index":"test",
      "id": 100
    }'

$index->setCluster('nodes4');
$index->deleteDocument(100);

indexApi.delete({"cluster":"nodes4","index" : "products", "id" : 100})

indexApi.delete({"cluster":"nodes4","index" : "products", "id" : 100})

DeleteDocumentRequest deleteRequest = new DeleteDocumentRequest();
deleteRequest.cluster("nodes4").index("products").setId(100L); 
indexApi.delete(deleteRequest);

Array(
    [_index] => test
    [_id] => 100
    [found] => true
    [result] => deleted
)

{'deleted': None, 'id': 100, 'index': 'products', 'result': 'deleted'}

{"_index":"products","_id":100,"result":"deleted"}

class DeleteResponse {
    index: products
    _id: 100
    result: deleted
}

Manticore supports basic transactions when performing deleting and insertion into real-time and percolate indexes. That is: each change to an index is first saved into an internal changeset, and then is actually committed to the index. By default each command is wrapped into an individual automatic transaction, making it transparent: you just 'insert' something, and can see the inserted result after it completes, having no care about transactions. However that behaviour can be explicitly managed by starting and committing transactions manually.

Transactions are supported for the following commands:

• INSERT
• REPLACE
• DELETE

Transactions are not supported for:

• UPDATE (which is different from the REPLACE in that it does in-place attribute update).
• ALTER - for updating index schema
• TRUNCATE - for emptying a real-time index
• ATTACH - for attaching a plain index to a real-time index
• CREATE - for creating an index
• DROP - for deleting an index

Please also note, that transactions in Manticore do not aim to provide isolation. The idea of transactions in Manticore is to let you accumulate a number of writes and run them at once at commit or rollback them all if needed. Transactions are integrated with binary log which gives durability and consistency.

SET AUTOCOMMIT = {0 | 1}

SET AUTOCOMMIT controls the autocommit mode in the active session. AUTOCOMMIT is set to 1 by default. With default you have not to care about transactions, since every statement that performs any changes on any index is implicitly wrapped into separate transaction. Setting it to 0 allows you to manage transactions manually. I.e., they will not be visible until you explicitly commit them.

Transactions are limited to a single RT or percolate index, and also limited in size. They are atomic, consistent, overly isolated, and durable. Overly isolated means that the changes are not only invisible to the concurrent transactions but even to the current session itself.

START TRANSACTION | BEGIN
COMMIT
ROLLBACK

BEGIN statement (or its START TRANSACTION alias) forcibly commits pending transaction, if any, and begins a new one.

COMMIT statement commits the current transaction, making all its changes permanent.

ROLLBACK statement rolls back the current transaction, canceling all its changes.

insert into indexrt (id, content, title, channel_id, published) values (1, 'aa', 'blabla', 1, 10);
Query OK, 1 rows affected (0.00 sec)

select * from indexrt where id=1;
+------+------------+-----------+--------+
| id   | channel_id | published | title  |
+------+------------+-----------+--------+
|    1 |          1 |        10 | blabla |
+------+------------+-----------+--------+
1 row in set (0.00 sec)

Inserted value immediately visible by following 'select' statement.

set autocommit=0;
Query OK, 0 rows affected (0.00 sec)

insert into indexrt (id, content, title, channel_id, published) values (3, 'aa', 'bb', 1, 1);
Query OK, 1 row affected (0.00 sec)

insert into indexrt (id, content, title, channel_id, published) values (4, 'aa', 'bb', 1, 1);
Query OK, 1 row affected (0.00 sec)

select * from indexrt where id=3;
Empty set (0.01 sec)

select * from indexrt where id=4;
Empty set (0.00 sec)

Here changes is NOT automatically committed. So, insertion is not visible even in the same session, since they're not committed. Also, despite absent BEGIN statement, transaction is implicitly started.

So, let's finally commit it:

commit;
Query OK, 0 rows affected (0.00 sec)

select * from indexrt where id=4;
+------+------------+-----------+-------+
| id   | channel_id | published | title |
+------+------------+-----------+-------+
|    4 |          1 |         1 | bb    |
+------+------------+-----------+-------+
1 row in set (0.00 sec)

select * from indexrt where id=3;
+------+------------+-----------+-------+
| id   | channel_id | published | title |
+------+------------+-----------+-------+
|    3 |          1 |         1 | bb    |
+------+------------+-----------+-------+
1 row in set (0.00 sec)

Now it is finished and visible.

Using BEGIN and COMMIT you can define bounds of transaction explicitly, so no need to care about autocommit in this case.

begin;
Query OK, 0 rows affected (0.00 sec)

insert into indexrt (id, content, title, channel_id, published) values (2, 'aa', 'bb', 1, 1);
Query OK, 1 row affected (0.00 sec)

select * from indexrt where id=2;
Empty set (0.01 sec)

commit;
Query OK, 0 rows affected (0.01 sec)

select * from indexrt where id=2;
+------+------------+-----------+-------+
| id   | channel_id | published | title |
+------+------------+-----------+-------+
|    2 |          1 |         1 | bb    |
+------+------------+-----------+-------+
1 row in set (0.01 sec)

SET TRANSACTION ISOLATION LEVEL { READ UNCOMMITTED
    | READ COMMITTED
    | REPEATABLE READ
    | SERIALIZABLE }

SET TRANSACTION statement does nothing. It was implemented to maintain compatibility with 3rd party MySQL client libraries, connectors, and frameworks that may need to run this statement when connecting. They just goes across syntax parser and then returns 'ok'. Nothing usable for your own programs, just a stubs to make third-party clients happy.

mysql> SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;
Query OK, 0 rows affected (0.00 sec)